Relocatable Safety Store
GENL201
Write a Review
1.981m x 1.981m x 2.635m, Holds Customisable Interior
Relocatable Safety Store is ideal for safe storage of highly flammable liquids.
Read More
PRICING (Based on quantity)
| 1+ |
|---|
|
£6,395.00
(Ex. VAT) |
Description & Specifications
Relocatable Safety Store is ideal for safe storage of highly flammable liquids.
- This durable unit is designed for the safe storage of highly flammable liquids, petroleum mixtures and other hazardous materials
- One hour fire rating; tested and approved by the Warrington Fire Research Centre in accordance with BS476: Part 22, Clause 5 (Tested July 1996)
- Double skin of plastic-coated sheeting and steel combine with insulation to offer maximum protection against the extremes of temperature
- Internal roof is made from 1.2mm galvanised steel panels profiled to a dedicated roof joint; profiled walls add extra strength and afford the unit complete weather protection
- All joints sealed with intrumescent sealant
- External roof is fitted with guttering to discharge rainwater at each end of the store
- Exterior is constructed of 1.5mm plastic-coated sheeting to give superior performance, colour stability and resistance to degradation; panels are screwed to each other and to the base
- Walls and door panels are insulated with 75mm Rockwool Firebatt to help reduce the effects of extreme external temperature changes on the inside of the store
- Base consists of a welded structure of 190mm x 80mm x 3mm channel section base frame underdrawn with 100mm x 50mm x 3mm box section runners spaced equidistant laterally along its length to give the unit uniform loading capability
- Fully welded 190mm deep bottom forms a deep, liquid-tight integral sump over the full base area of the store that comfortably exceeds the recommended requirement for spillage containment
- Removable, open galvanised steel floor panels are formed using 6mm twisted, square section bars that are forge-welded to load-bearing bars creating 20mm x 3mm spaces; design provides a walkover grid floor with maximum resistance against loading distortion, yet allows spillages or leaks to collect in the sump; panels are easily removed for inspection or cleaning
- High and low flame arrested ventilators allow air circulation through the unit
- A single door (98cm W x 198cm H) fitted with Yale security locks with internal override makes the unit secure, but easy to exit
| Colour | Goosewing Grey & Olive Green |
| Dimensions | 1.981m W x 1.981m L x 2.635m H |
| Load Capacity UDL | 3885 kg |
| Sump Capacity | 740 L |
| Rain Gutter | 8cm Gutter on Both Sides |
| Sold as | 1 each |
| Weight | 790 kg |
| Composition |
1.5mm plastic coated steel external walls & roof 1.2mm galvanised steel internal walls & roof 3mm steel base |
| Capacity | Customisable Interior |
| Door Style | Single Swing Door |
Reviews
Based on 0 review(s)
Additional Information
-
HS(G) 51
Provides guidance on the control measures you could adopt for the safe storage of containers containing flammable liquids. It sets out the steps which need to be taken to control the risks of fire and explosion. The guidance applies to all storage locations whether in the open air, or in specifically designed buildings, rooms or cabinets. -
The Control of Pollution (Oil Storage) Regulations (Northern Ireland) 2010
The Regulations apply to above ground oil storage facilities on industrial, commercial and institutional residential sites. They also extend to companies who refine or distribute oil. The Regulations set minimum design standards for new and existing above ground oil storage facilities, codifying existing good practice to ensure that above ground oil storage facilities are adequately constructed. A key requirement of the Regulations is for the storage container to have a secondary containment system (a bund, which is an outer wall or enclosure designed to contain the contents of an inner tank, or, a drip tray) to ensure that any leaking or spilt oil is contained and does not enter the aquatic environment. -
The Control of Pollution (Oil Storage)(England) Regulations 2001
This regulation applies to any container with a storage capacity of over 200 litres, and applies to any industrial, commercial or institutional site, e.g. factories, shops, offices, hotels, schools, public sector buildings and hospitals. All types of oil except waste oil are included. A bund or catchpit has to form a container around the tank capable of holding 110% of the contents of the oil stored or 25% of the total volume, whichever is greater. This is known as secondary containment. -
The Water Environment (Oil Storage) (Scotland) Regulations 2006
This regulation applies to any container with a storage capacity of over 200 litres. It affects all premises, including land and mobile plant, as well as private dwellings. "Oil" means any kind of oil and includes petrol, diesel, waste and vegetable and plant oil, but does not include bitumen. The storage container, whether indoors or outdoors, must be situated within a secondary containment system capable of holding 110% of the contents of the oil store or 25% of the total volume (whichever is greater). -
The Water Resources (Control of Pollution) (Oil Storage) (Wales) Regulations 2016
The Regulations apply to any kind of oil, including petrol, diesel, kerosene, lubricating oil (both mineral and synthetic), waste oil, vegetable and plant oil, and apply to any kind of container which has a capacity of greater than 200 litres which is being used to store oil above ground, whether inside or outside a building. This includes fixed tanks, intermediate bulk containers (IBCs), drums (oil drums or similar containers used for storing oil) or mobile bowsers. The Regulations will come into force in 3 stages - Tanks installed after 15 March 2016 will have to comply with the Regulations from the date they are installed; Existing tanks at significant risk (i.e. facilities that are located within 10 metres of any surface water or wetland, or 50 metres of a borehole or well), will have to comply within 2 years (i.e. by 15 March 2018); Existing tanks not at significant risk will have to comply within 4 years (i.e. by 15 March 2020). The secondary containment system must contain at least 110% of the maximum contents of the oil container, or at least 25% of the total storage capacity if multiple containers are stored, whichever is the greater.
- Certifications, Approvals and Ratings
BS476: Part 22 1987 Clause 5; 1hr Resistance (Warrington Fire Research Service; July 1996)
